If you’re not quite a hoisting veteran yet, there are 3 questions you need to ask yourself anytime you’re about to head out to a new project:

1. “Do I have Abell Howe equipment?”

Certain names are considered the “big guns” in their respective industries.  When it comes to hoisting, <a href=”http://www.hoistsdirect.com/Abell-Howe%20Jib%20Cranes.htm”>Abell Howe</a> is one of those big names.  In fact, over the past 75 years, they have become one of the biggest crane companies in the entire world!

So, what do they do?

The company makes jib cranes that can either mount to your floor or to your wall, and some of them offer 360-degree rotation so that you can tackle any project at any angle!
Abell Howe doesn’t like to rest on its laurels, though.  In fact, they have a team of in-house engineers and designers who are always coming up with new ideas.

2. “Is my beam clamp collection big enough?”

If you’re relatively new to the hoisting world, here’s a tip for you — you can never have too many beam clamps on hand!

After all, if you plan on getting beams into the air, you’ll need a <strong>beam clamp</strong> for each one.  In fact, you’ll need three beam clamps — one for the center and one for each of the ends.

Unlike other hoisting tools, beam clamps can automatically adjust to wider beams.  Plus, they’re strong enough to hold your beams in the air for as long as necessary.
Since they’re so vital to any hoisting project, it’s important to make sure your beam clamp collection is a big one!

3. “Should I bring my festooning equipment along, too?”

The answer to this is always, “yes!”  That’s because <a href=”http://www.hoistsdirect.com/Duct-O-Wire_menu.htm”>festooning</a> equipment can be a permanent way to hang things from your ceiling — unlike a beam clamp, which is only used on a temporary basis.
Even if you don’t plan on using your festooning equipment as a permanent solution, it can provide an important benefit that beam clamps can’t, because it connects right to your ceiling.  And, because it’s got a durable track and stainless steel bearings, you can slide it around.

That means you won’t have to take it down and re-install it just because you need to hoist something a few feet to the left or right.

Plus, you can use festooning equipment to hoist and hold just about anything — from heavy equipment to heavy cables.  You won’t get that kind of variety with a beam clamp.

The team at <a href=”http://www.hoistsdirect.com/”>Hoists Direct</a> has top-quality equipment that can make your next hoisting project a success!